AGEOD Forums

2 screens:



There is a problem, between Jackson and Canton. It quite obliges units coming by rail from the south to go to Memphis by corinth



The rail as drawn on the map does not really concord with the travel planed, or does the rail from bolivar to corinth considered as passing 2 rivers?

bump

I remember this post, but was confused by what you are trying to ask.

Anyway, I just took a look at the rail links in Jackson, MS area.
You are right, units do not want to use rail movement through Jackson.
Then I looked through the .rgn files for the regions surrounding Jackson, MS (Copiah, MS in the files)
Edited all the "TransLink" lines so they matched up. Still did not work. Don't know if I'm looking at the right thing though.
Only other thing I could think of was the "blizard" conditions in Jackson, is it screwing up rail movement?

I've seen the same thing, regardless of weather. The units bypass Jackson. There's a glitch somewhere in that region.

Just spent 2 hours messin with this and still do not know what is wrong.
(don't even remember the original problem now )

I got units to move by rail out of Jackson, MS (Copiah, MS) to the North, East and South.
Cannot get them to move using rail to the West, towards Vicksburg.
Units leaving Vicksburg by rail towards Jackson, won't go into the connecting region (Claiborne, MS). They go around Claiborne, MS instead.

I'm almost out of ideas.....

p.s. leure:

I'll check the map editor, might be a missing rail link connection.

bump en rajoutant le pont ferrée qui enjambe le mississipi à Memphis

up

PhilThib wrote:I'll check the map editor, might be a missing rail link connection.

I believe one or more of the regions is missing an adjacency entry. Same issue with Shelby, IN.